Inside the city, your authority is the Office of the Fire Marshal at the Raleigh Fire Department, based in the Dillon Building at 310 W. Martin Street. Outside the city limits — plus Rolesville and Wendell — it is the Wake County Fire Marshal’s Office, which enforces the North Carolina Fire Code across unincorporated Wake County.
Raleigh publishes its inspection cycle, and restaurants sit at the top of it: restaurants, clubs and places of entertainment are inspected annually. Industrial and educational occupancies are inspected every two years, mercantile and storage every three. If you operate a restaurant in Raleigh, you are on the shortest fire-inspection cycle the city runs.
You also answer to a second inspector. Wake County Environmental Health & Safety states that restaurants are inspected one to four times a year, depending on menu items and food processes — so a scratch kitchen handling raw proteins sees an inspector far more often than a cafe reheating prepared food.
Two authorities, two records. The fire marshal is looking at your exhaust system and suppression; the health inspector is looking at the kitchen around it. NFPA 96 requires a certificate kept on the premises naming the servicing company, the person who performed the work and the date — Kitchen Guard leaves that certificate after every visit, with before-and-after photographs attached.
Kitchen Guard is a Piedmont Triad company that runs Raleigh on a scheduled route, and we would rather say that plainly than imply a storefront off Glenwood Avenue. What the model gives you is predictability: a booked slot after close, a crew carrying the access panels and hinge kit the job needs, and a documented result waiting in the morning.
We clean the complete system — canopy, filters, plenum, the full duct run and the rooftop fan — and photograph it before and after. One record satisfies the fire marshal; the clean kitchen underneath it is what the health inspector sees on a visit that may come four times a year.
From the hood filters to the rooftop fan, we clean the whole system and document it for both of the inspectors who walk through your door.
Our technicians work to NFPA 96 as it is enforced here — by the Office of the Fire Marshal at the Raleigh Fire Department inside the city, and the Wake County Fire Marshal’s Office beyond it. That includes the six-month servicing of the hood and its suppression system that North Carolina fire marshals cite most often.
Every visit produces before-and-after photographs of the canopy, plenum, duct run and rooftop fan, plus a dated certificate naming the servicing company, the technician and the date — the record NFPA 96 requires you to keep on the premises.
We are based in the Piedmont Triad and serve Raleigh on a scheduled route — 77 miles down I-40, about an hour and twenty minutes. Routed work is what makes overnight service practical, and it is how a Raleigh job gets priced and documented the same way a Raleigh one does.
We are available around the clock for questions about NFPA 96 compliance, scheduling, or an exhaust problem that cannot wait until morning.
Additionally, our experienced team specializes in commercial kitchen cleaning and ensures your exhaust hood and air vent cleaning are handled with precision.
Consequently, you stay informed with instant alerts about hood NFPA compliance, scheduled services, or emergency maintenance needs.
Every Kitchen Guard service covers the complete exhaust path:
“Cleaned to bare metal” is the phrase the trade uses. What the standard actually requires is that surfaces be cleaned to remove combustible contaminants to a minimum of 0.002 in. — fifty microns. That is the number behind the phrase, and it is measurable.
You get before-and-after photographs and a dated compliance certificate. If there is something we could not reach — a duct run with no access panel, a section that needs a panel cut in — it goes in the report rather than quietly being left out of it.
Every Kitchen Guard service covers the complete exhaust path, not only the parts that are easy to reach.
we cover it all.
Glenwood South and the Warehouse District cook hard and close late, which leaves a narrow overnight window. We book it in advance, clean the full system, and leave the certificate and photographs before the morning prep shift arrives.
NC State’s dining operations and the corporate campuses out toward Research Triangle Park run contract-managed kitchens. Those accounts need scheduled service, standardized reporting, and intervals that hold across every site under one agreement.
Concession kitchens at the Lenovo Center, the NC State Fairgrounds and the Raleigh Convention Center cook in short, heavy bursts on a calendar published a season ahead. We work the gaps between events so every stand is ready for the next gate.
WakeMed, UNC Rex and Duke Raleigh run production kitchens that cannot close. Phased overnight work keeps service running, and the documentation requirements in healthcare are the strictest of any category we handle.
Raleigh inspects educational occupancies every two years, and campus kitchens at NC State and across Wake County Public Schools run to an academic calendar — which makes the service windows predictable and worth booking well ahead of term.
Convention hotels downtown, the North Hills cluster and the Brier Creek corridor near RDU swing from idle to full banquet output for a single event. Grease load tracks events rather than covers, and the inspection standard is the same as any restaurant.
Explore More Kitchen Guard Services:
GREENSBORO HOOD CLEANING FAQ
Below are common questions from Raleigh restaurant owners and food service operators about NFPA 96 hood cleaning compliance.
Our NFPA 96 certified team brings extensive expertise to every job. Additionally, we use commercial-grade cleaning solutions approved for kitchen exhaust systems. Furthermore, our technicians document every service with before-and-after photos. As a result, you have proof of compliance ready for any inspection. In addition, we schedule cleanings around your business hours to minimize disruption. Moreover, our service reports are formatted to meet insurance and fire marshal requirements. Consequently, our clients consistently pass fire department inspections on the first review.
Inside the city, it is the Office of the Fire Marshal at the Raleigh Fire Department, based in the Dillon Building at 310 W. Martin Street. Outside the city limits — along with Rolesville and Wendell — it is the Wake County Fire Marshal’s Office. Both enforce the North Carolina Fire Code.
Raleigh’s published schedule puts restaurants, clubs and places of entertainment on an annual inspection, the shortest cycle the city runs. Industrial and educational occupancies are inspected every two years; mercantile and storage every three.
Separately from the fire marshal, Wake County Environmental Health & Safety states that restaurants are inspected one to four times a year, depending on menu items and food processes. A scratch kitchen handling raw proteins sees an inspector considerably more often than a cafe reheating prepared food.
Under NFPA 96, the interval is a schedule of inspection for grease buildup — cleaning follows what that inspection finds. Systems serving solid fuel (wood-fired ovens, charcoal, smokers) are inspected monthly; high-volume operations such as 24-hour cooking, charbroiling or wok cooking quarterly; moderate-volume kitchens semiannually; and low-volume or seasonal kitchens annually. In the top tiers, that means cleaning at effectively every inspection.
NFPA 96 requires a certificate kept on the premises naming the servicing company, the person who performed the work, and the date. Keep the full run of them rather than the most recent tag alone — inspectors routinely ask for service history. Kitchen Guard leaves a certificate after every visit, with before-and-after photographs, and keeps your history on file.
Yes. Raleigh work is scheduled overnight on a booked route, so the system is cleaned after close and the kitchen is ready for the morning shift. Because the work is routed rather than dispatched, book ahead — same-day requests generally cannot be met at this distance.
It is shorthand for what the standard actually requires: surfaces cleaned to remove combustible contaminants to a minimum of 0.002 in., or fifty microns. It applies to the whole system — hood, filters, plenum, ductwork and fan — not only the surfaces visible from the cook line.
Yes. Groups with sites across Raleigh, Cary, Durham and the wider Triangle are scheduled together on one route with a single reporting package covering every location, which also keeps inspection intervals aligned across kitchens that cook differently.
